WALLART METAL FOND
Water-based
Davies WALL ART METAL FOND PRIMER is specifically used as primer for Wall Art Metal Design. It is water-based primer that is free from Volatile Organic Substances and Environmental Friendly.
Product Details
Water-based
Interior
7-8 sq.m. per 1-Liter *Depending on surface porosity
8-10 Hours
SURFACE PREPARATION
Concrete Surfaces
New Painting
- All surfaces must be clean, dry, free from dust, dirt, chalk, laitance, efflorescence, rust, grease, oil, and all other foreign materials.
- Allow new concrete to cure and dry completely for at least 28 days with a moisture content of less than 15% and a Ph level below 10.
- To neutralize and remove efflorescence, treat surfaces with Davies DV-100-X Concrete Neutralizer diluted with 16 parts water to 1 part DV 100-X. Apply by brush or mop to wet surface thoroughly and dry overnight. Rinse with water and dry.
- When applying Rendering Paste or Skimcoat for rough surfaces, concrete may be cured for only 7-14 days. Use MONDO SK-1 Skimcoat Superfine White Powder or MONDO SK-2 Rendering Paste.
Repainting
- Remove mold and mildew growth with Davies DV-500-X Mildewcide Wash Solution. Rinse with water, dry and immediately apply the recommended paint system to prevent regrowth of mold and mildew.
- For surfaces that exhibit severe chalk, apply one coat of Davies DV-5-530 Liquid Tile Penetrating Sealer or Davies DV-555 Concrete Clear Sealer.
- Repair uneven surfaces with Davies DV-5000 Concrete Putty or Davies DV-5-900 Liquid Tile Cast.
PAINTING SYSTEM
Concrete Surfaces
Step 1 - Apply one (1) coat of WA-MFP Wall Art Metal Fond using a roller or brush in irregular criss cross movements to highlight the chromatic effect. Let dry for 8 hours.
Step 2 - Apply one (1) coat of Wall Art Metal using a roller or Wall Art Spalter Brush in similar irregular criss cross strokes or, alternatively, by using a glove to apply the product using circular movements. Let dry for 2 hours.
Step 3 - Apply second coat of Wall Art Metal using the same technique used for the first coat. Let dry for 4 to 6 hours.