WALLART INDUSTRIA
Natural Concrete Finish
Product Details
Natural Concrete Finish
Interior & Exterior
30 sq.m. per 22kg-set *Depending on surface porosity
12-24 Hours
SURFACE PREPARATION
Concrete Surfaces
New Painting
- All surfaces must be clean, dry, free from dust, dirt, chalk, laitance, efflorescence, rust, grease, oil, and all other foreign materials.
- Allow new concrete to cure and dry completely for at least 28 days with a moisture content of less than 15% and a Ph level below 10.
- To neutralize and remove efflorescence, treat surfaces with Davies DV-100-X Concrete Neutralizer diluted with 16 parts water to 1 part DV-100-X. Apply by brush or mop to wet surface thoroughly and dry overnight. Rinse with water and dry.
- When applying Rendering Paste or Skimcoat for rough surfaces, concrete may be cured for only 7-14 days. Use MONDO SK-1 Skimcoat Superfine White Powder or MONDO SK-2 Rendering Paste.
Repainting
- Remove mold and mildew growth with Davies DV-500-X Mildewcide Wash Solution. Rinse with water, dry and immediately apply the recommended paint system to prevent regrowth of mold and mildew.
- For surfaces that exhibit severe chalk, apply one coat of Davies DV-5-530 Liquid Tile Penetrating Sealer.
- Repair uneven surfaces with Davies DV-5000 Concrete Putty or Davies DV-5-900 Liquid Tile Cast.
PAINTING SYSTEM
Product Preparation:
Step 1 - Mix Part A of Wall Art Industria to Part B using an electric drill mixer. Adjust ratios as needed to achieve desired consistency.
Step 2 - Blend until the mixture is lump free and homogenous. Use a big container for bigger volumes of mixtures. Do nnot add water while mixing, or after desired consistency is achieved.
Application Direction:
Step 1 - Lightly mist concrete surface with water, or dampen with the wet cloth before application.
Step 2 - Apply Wall Art Industria mixture thinly on the surface with a stainless steel trowel. For the first coat, apply evenly at around 1mm thick. Allow six(6) - eight(8) hours drying before applying the second coat.
Step 3 - Once fuly dry, lightly sand uneven areas of the surface.
Step 4 - Apply second coat of Wall Art Industria mixture to level and create desired deisgn effect. Polish the surface using a stainless steel trowel.
Step 5 - Allow the surface to dry for 2-3 days before sanding rough edges. Apply Wall Art Industria Clear Topcoat for maximum protection.