WALLART FIBRATEX GLUE
Water-Based : Adhesive
Davies Wall ArtTM FibratexTM Glue is a professional grade ready-to-use water-based adhesive specially formulated to give a seamless and smooth finish when installing Davies Wall ArtTM Fibratex Wallcoverings on the wall, it is suitable for use with woven fiber coverings and is easy to spread and apply.
Product Details
Water-Based : Adhesive
Interior
16 sq.m. per 4-Liters *Depending on surface porosity
24 Hours
SURFACE PREPARATION
Concrete Surfaces
New Painting
- All surfaces must be clean, dry, free from dust, dirt, chalk, laitance, efflorescence, rust, grease, oil, and all other foreign materials.
- Allow new concrete to cure and dry completely for at least 28 days with a moisture content of less than 15% and a Ph level below 10.
- To neutralize and remove efflorescence, treat surfaces with Davies DV-100-X Concrete Neutralizer diluted with 16 parts water to 1 part DV 100-X. Apply by brush or mop to wet surface thoroughly and dry overnight. Rinse with water and dry.
- When applying Rendering Paste or Skimcoat for rough surfaces, concrete may be cured for only 7-14 days. Use MONDO SK-1 Skimcoat Superfine White Powder or MONDO SK-2 Rendering Paste.
Repainting
- Remove mold and mildew growth with Davies DV-500-X Mildewcide Wash Solution. Rinse with water, dry and immediately apply the recommended paint system to prevent regrowth of mold and mildew.
- For surfaces that exhibit severe chalk, apply one coat of Davies DV-5-530 Liquid Tile Penetrating Sealer.
- Repair uneven surfaces with Davies DV-5000 Concrete Putty or Davies DV-5-900 Liquid Tile Cast.
PAINTING SYSTEM
Concrete Surfaces
Step 1 - Cut the Davies Wall Art Fibratex with the size fit to the surface of the wall or 3 - 4 sqm, having a 10cm extra leeway.
Step 2 - Apply DV-FBG Davies Wall Art Fibratex Glue on the wall by roller. Work on the whole sections if possible or approximately 3 - 4 sqm.