WALLART FIBRATEX
Woven Textile Wall Covering Fiber
Davies Wall Art Fibratex is a glass textile wall coverings that are made of glass yarns. The open-pore textile structure encourages natural moisture vapor diffusion, substantially enhancing climatic condition in the room. It has standard range of woven and non-woven paintable patterns to cover cracks and reinforce delicate surfaces.
Davies Wall Art Fibratex is perfect for any space where people want to feel special and relaxed, so they can enjoy the timeless elegance of Davies Wall Art Fibratex.
Product Details
Woven Textile Wall Covering Fiber
Interior
1 sq.m. (10m/roll)
24 Hours
SURFACE PREPARATION
Concrete Surfaces
New Painting
- All surfaces must be clean, dry, free from dust, dirt, chalk, laitance, efflorescence, rust, grease, oil, and all other foreign materials.
- Allow new concrete to cure and dry completely for at least 28 days with a moisture content of less than 15% and a Ph level below 10.
- To neutralize and remove efflorescence, treat surfaces with Davies DV-100-X Concrete Neutralizer diluted with 16 parts water to 1 part DV-100-X. Apply by brush or mop to wet surface thoroughly and dry overnight. Rinse with water and dry.
- When applying Rendering Paste or Skimcoat for rough surfaces, concrete may be cured for only 7-14 days. Use MONDO SK-1 Skimcoat Superfine White Powder or MONDO SK-2 Rendering Paste.
Repainting
- Remove mold and mildew growth with Davies DV-500-X Mildewcide Wash Solution. Rinse with water, dry and immediately apply the recommended paint system to prevent regrowth of mold and mildew.
- For surfaces that exhibit severe chalk, apply one coat of Davies DV-5-530 Liquid Tile Penetrating Sealer.
- Repair uneven surfaces with Davies DV-5000 Concrete Putty or Davies DV-5-900 Liquid Tile Cast.
PAINTING SYSTEM
A. Concrete Surfaces
Step 1 - Cut the Davies Wall Art Fibratex with the size fit to the surface of the wall or 3 - 4 sqm, having a 10cm extra leeway.
Step 2 - Apply DV-FBG Davies Wall Art Fibratex Glue on the wall by roller. Work on the whole sections if possible or approximately 3 - 4 sqm.
Step 3 - Attach previously cut DAVIES Wall Art Fibratex on the wall. Fix it by pressing using a Wall covering trowel across the whole area.
Step 4 - Trim overlapped strips on each edge with a cutter, with the guide of trimming trowel. Let dry for 24 hours.
Step 5 - Apply 2 coats of any Topcoat Latex paint with desired color and finish by roller. Allow 2 - 4 hours in between coats.