WALLART DOLCEVITA
Pearly Effect
Davies WALL ART DOLCEVITA gives a modern look to your spaces, a decorative coating characterized by a soft metallic, matte finish and gentle pearls details. With its "" washed-out concrete"" effect, it fits perfectly into the modern industrials style. Davies Wall art Dolcevita with a textured , trowelled finish, easy to apply and available in gold and silver finishes.
Product Details
Pearly Effect
Interior
5-8 sq.m. per 1-Liter *Depending on surface porosity
24 Hours
SURFACE PREPARATION
Concrete Surfaces
New Painting
- All surfaces must be clean, dry, free from dust, dirt, chalk, laitance, efflorescence, rust, grease, oil, and all other foreign materials.
- Allow new concrete to cure and dry completely for at least 28 days with a moisture content of less than 15% and a Ph level below 10.
- To neutralize and remove efflorescence, treat surfaces with Davies DV-100-X Concrete Neutralizer diluted with 16 parts water to 1 part DV-100-X. Apply by brush or mop to wet surface thoroughly and dry overnight. Rinse with water and dry.
- When applying Rendering Paste or Skimcoat for rough surfaces, concrete may be cured for only 7-14 days. Use MONDO SK-1 Skimcoat Superfine White Powder or MONDO SK-2 Rendering Paste.
Repainting
- Remove mold and mildew growth with DAVIES DV-500-X Mildewcide Wash Solution. Rinse with water, dry and immediately apply the recommended paint system to prevent regrowth of mold and mildew.
- For surfaces that exhibit severe chalk, apply one coat of Davies DV-5-530 Liquid Tile Penetrating Sealer or Davies DV-555 Concrete Clear Sealer.
- Repair uneven surfaces with Davies DV-5000 Concrete Putty or Davies DV-5-900 Liquid Tile Cast.
PAINTING SYSTEM
Concrete Surfaces
Step 1 - Apply one(1) coat of WA-DCP Wall Art Decoprime Undercoat Primer using a roller. Let dry for 8 hours.
Step 2 - Apply one(1) coat of Wall Art Dolcevita using a Wall Art Stainless Steel Trowel until a compact finish is reached. Let dry for 8 hours.
Step 3 - Apply second coat of Wall Art Dolcevita as before, then trowel finish to achieve the desired effect.
Step 4 - While the surface is still wet, make vertical movements with a Wall Art Stainless Steel Trowel until the desired texture is reached. Let dry for 24 hours.