POWERFLOOR
2-Component Solvent-Free Epoxy
Davies Powerfloor is a two-pack high performance epoxy floor coating designed to provide a tough and durable protection to interior concrete floors. This 100% solid one-coat system forms a smooth glossy finish with outstanding resistance to abrasion and impact, and solvent and chemical spillage.
Product Details
2-Component Solvent-Free Epoxy
Interior
12-16 sq.m. per 4-Liters *Depending on surface porosity
Dry to touch : 8 Hours, Light Traffic : 24 Hours, Full Traffic : 7 days
SURFACE PREPARATION
- New concrete and cement plastered surfaces must be thoroughly cured for 28 days before painting, having a moisture content of less than 15% and a pH below 9.
- Remove concrete laitance and other impurities.
- Thoroughly clean the surface and ensure that it is dry, free from oil, grease, loose materials and other possible contaminants.
PAINTING SYSTEM
PRODUCT PREPARATION : MIXING DIRECTION
Mix Ratio:
Mix 3 Liters of Davies Powerfloor Base to 1 Liter Davies Powerfloor Hardener.
- Premix Davies Powerfloor Base to a uniform consistency.
- Add the entire contents of Davies Powerfloor Hardener to Davies Powerfloor Base and MIX SLOWLY but THOROUGHLY for 5 MINUTES. It is better to transfer the contents to a bigger container for easy mixing.
- Apply immediately with a roller or brush.
- All mixed paint must be used within the POT LIFE time limit.
Thinning: If necessary, dilute with not more than 5% Davies Epoxy Reducer.
A. Concrete (Plain Finish)
Primer/Sealer: Apply one (1) coat of Davies Eposeal
Topcoat: Apply one (1) coat of Davies Powerfloor
B. Concrete (Non-Skid Finish)
Primer/Sealer: Apply one (1) coat of Davies Eposeal
Broadcast aggregates on wet Davies Eposeal at 1kilo/sqm and dry overnight. Dust off aggregates
Topcoat: Apply one (1) coat of Davies Powerfloor