A. Concrete Surfaces

New Painting

• All surfaces must be clean, dry, free from dust, dirt, chalk, laitance, efflorescence, rust, grease, oil, and all other foreign materials.
• Allow new concrete to cure and dry completely for at least 28 days with a moisture content of less than 15% and a Ph level below 10.
• To neutralize and remove efflorescence, treat surfaces with Davies DV-100-X Concrete Neutralizer diluted with 16 parts water to 1 part DV 100-X. Apply by brush or mop to wet surface thoroughly and dry overnight. Rinse with water and dry. 
• When applying Rendering Paste or Skimcoat for rough surfaces, concrete may be cured for only 7-14 days. Use MONDO SK-1 Skimcoat Superfine White Powder or MONDO SK-2 Rendering Paste.

Repainting

• Remove mold and mildew growth with Davies DV-500-X Mildewcide Wash Solution. Rinse with water, dry and immediately apply the recommended paint system to prevent regrowth of mold and mildew.
• For surfaces that exhibit severe chalk, apply one coat of Davies DV-5-530 Liquid Tile Penetrating Sealer.
• Repair uneven surfaces with Davies DV-5000 Megacryl Concrete Putty Filler or Davies DV-5-900 Liquid Tile Cast.

B. Wood Surfaces

New Painting

• All surfaces must be clean, dry, free from dust, dirt, chalk, laitance, efflorescence, rust, grease, oil, and all other foreign materials.
• Sand wood surface until smooth to touch with no slivers or rough edges. Dust off and wipe with a clean rag.
• Patch all holes and imperfections with Davies DV-5000 Megacryl Concrete Putty Filler. Sand smooth and dust off.

B. Repainting

• Use Davies DV-300-X Strip-eze Paint Remover to aid in scraping off old paint. 
• Patch all holes and imperfections with Davies DV-5000 Megacryl Concrete Putty Filler. Sand smooth and dust off.