Find a Store
  • EPICON FINISH HB, based on a combination of epoxy resin, and polyamide curing agent, has high-build excellent durability and adhesion properties. It is suitable as a finish coat for protection of inside and outside of the superstructures of steel, bridges and steel structures.
  • CERABOND is a combination of heat resistant alloy and heat resistant silicate solution producing an inorganic rust preventive coat mechanically adhered to the steel and giving an effective and long-term- protection against corrosion without suffering from blistering and loss of adhesion. Recommended Use: As a shop primer for temporary protection of blast-cleaned steel, as a general purpose rust-preventing primer for organic and inorganic cover-coating, and also as a heat resistant paint.
  • EPICON ZINC RICH PRIMER B-2, a two- pack primer, based on a combination of metallic zinc, epoxy resin and hardener. It dries quickly and gives adequate preliminary protection of steel after sand – or shot- blasting. This primer is completely compatible with almost any type of paint and highly resistant to heat, oil, water and solvent. Recommended Use: As a shop primer for protection of blast-cleaned steel plates used for underwater area for outer hull. And other steel structures.
  • NZ PRIMER S: based on a combination of epoxy resin, rust preventing pigments and hardener, is quick drying and gives adequate preliminary protection of blast cleaned steel plates. Recommended Use: As a shop primer for protection of last cleaned steel plates especially suitable for steel plates subject to prolonged weathering.
  • EPICON MARINE HB AL: is a combination of epoxy resin and curing agent containing aluminum pigment. It possess excellent physical properties such as adhesion, toughness, impact and abrasion resistance, sea water and water resistance and it is highly resistant to cathodic protection. It is suitable for underwater areas. Recommended Use: Primer of EPICON MARINE system on the steel ship’s outer shell and under water areas and other steel structures
  • BISCON HB–NT L, is a modified epoxy paint. It gives excellent physical properties such as adhesion, toughness and abrasion resistance, etc. and chemical resistance to water, salt water and crude oil. Recommended Use: Cargo hold, inside and outside of accommodation space, Void space, Cofferdam, Engine room , Pipe line. Other steel structures
  • UMEGUARD SX, surface tolerant paint, is a modified epoxy paint. It gives excellent physical properties such as adhesion, toughness and abrasion resistance, etc. and chemical resistance to water, salt water and crude oil. It has good adhesion to wide range existing coatings and suitable for application to corroded areas where optimum pre-treatment is not practical. Recommended Use: Cargo hold, Inside and outside of accommodation space. Void space, Cofferdam, Engine room, Pipe line. Other steel structures, etc.
  • UMEGUARD HS, is a high solid modified epoxy paint which is specially designed for steel surfaces prepared by high pressure fresh water cleaning. The surface does not need to be completely dry, and may be slightly dump during application. This product has excellent tolerance for poor surfaces, with good anti-corrosive properties and acid/alkali resistance. Recommended Use : Deck, Topside, Superstructure, Inland construction, Ballast tank
  • SUPERBONDEX , surface tolerant paint, is a high solid modified epoxy paint. It is strong but flexible coating with excellent adhesion, impact and abrasion resistance properties. Recommended Use: Hull , Decks, Hold, Bridge, and offshore construction
  • BANNOH 500: is a multi-purpose primer, which gives excellent physical properties such as toughness, abrasion resistance and adhesion, etc. and has excellent flexibility, resistance to sea water and cathodic protection. Recommended Use: Anti-corrosive paint for ships hull, exposed decks, superstructures and ballast water tanks, etc.
  • BANNOH 1500 is a multi-purpose high solid epoxy primer, which gives excellent physical properties such as toughness, abrasion resistance and adhesion, etc., and has excellent flexibility, resistance to water and cathodic protection. It is suitable for most areas of ship as universal primer. Recommended Use: Anti-corrosive paint for ship's hull, exposed decks, superstructures and ballast water tanks, etc.
  • NOVA 500, is a modified epoxy paint. It gives excellent physical properties such as adhesion, toughness and abrasion resistance, etc. and chemical resistance to water, salt water and crude oil. Recommended Use: Cargo hold, inside and outside of accommodation, Void space, Cofferdam, Engine room, Pipe line, Other steel structures etc.