LIQUID TILE CAST
High Performance Paints
Davies Liquid Tile Cast is a putty-like acrylic based paste used to create desired textured design finish for wood, concrete and metal surfaces. It can also be used as filler to fill-in dents, welded areas, nail holes, crevices and other surface imperfection. It can be topcoated with both water and solvent based acrylic system.
Product Details
High Performance Paints
Interior & Exterior
5-6 sq.m. per 4-Liters *Depending on surface porosity
5-12 Hours
SURFACE PREPARATION
New Painting
- New Concrete and cement plastered surfaces must be thoroughly cured for 14 to 28 days before painting.
- Remove concrete laitance and other impurities.
- Thoroughly clean the surface and ensure that it is dry, free from oil, grease, loose materials and other possible contaminants.
Repainting
- Thoroughly clean the surface and ensure that it is dry, free from oil grease, loose materials and other possible contaminants.
- If the surface is powdery and chalky, scrub and clean with water before applying one coat of Davies DV-5-530 or DV-5-531 Liquid Tile Penetrating Sealer.
- For mildew and molds, treat with 1 part liquid bleach and 3 parts water solution. Rinse with water and allow the surface to dry before painting.
PAINTING SYSTEM
A. Concrete Surfaces: Plain Finish
Primer/Sealer: Apply one (1) coat of Davies DV-5-530 or DV-5-531 Liquid Tile Penetrating Sealer
Putty: As needed, apply Davies DV-5-1000 Putty Filler on surface imperfections Undercoat
Primer: As needed, Apply Davies DV-5-700 Liquid Tile Primer on puttied surfaces
Topcoat: Apply two (2) coats of Davies Liquid Tile Topcoat Finish
B. Concrete Surfaces: Textured Finish
Primer/Sealer: Apply one (1) coat of Davies DV-5-530 or DV-5-531 Liquid Tile Penetrating Sealer
Putty: Apply one (1) coat of Davies DV-5-900 Liquid Tile Cast Undercoat
Primer: Apply one (1) coat of Davies DV-5-700 Liquid Tile Primer
Topcoat: Apply two (2) coats of Davies Liquid Tile Topcoat Finish