KERAMIFLOOR
2-Component Polyurethane
Davies Keramifloor is a two-pack, air drying, chemically-cured polyurethane coating developed for the protection of floors subject to high levels of wear and tear, where excellent chemical and physical resistance is required. It is an effective concrete, wood, and metal floor coating because of its outstanding life expectancy and performance, resistance to highly corrosive environments, high abrasion resistance and superior adhesion.
Product Details
2-Component Polyurethane
Interior & Exterior
25 sq.m. per 4-Liters *Depending on surface porosity
Dry to touch : 2 Hours, Light Traffic : 24 Hours, Full Traffic : 7 days
SURFACE PREPARATION
- New concrete and cement plastered surfaces must be thoroughly cured for 28 days before painting, having a moisture content of less than 15% and a pH below 9.
- Remove concrete laitance and other impurities.
- Thoroughly clean the surface and ensure that it is dry, free from oil, grease, loose materials and other possible contaminants.
PAINTING SYSTEM
PRODUCT PREPARATION : MIXING DIRECTION
Mix Ratio:
Mix 3.75 Liters of Davies Keramifloor Base to 0.25 Liter Davies Keramifloor Hardener.
- Premix Davies Keramifloor Base to a uniform consistency.
- Add the entire contents of Davies Keramifloor Hardener to Davies Keramifloor Base and MIX SLOWLY but THOROUGHLY for 5 MINUTES. It is better to transfer the contents to a bigger container for easy mixing.
- Apply immediately with a roller or brush.
- All mixed paint must be used within the POT LIFE time limit.
Dilute with not more than 10% Davies Keramifloor Reducer.
A. Concrete (Plain Finish)
Primer/Sealer: Apply one (1) coat of Davies Eposeal
Topcoat: Apply two (2) coats of Davies Keramifloor
B. Concrete (Non-Skid Finish)
Primer/Sealer: Apply one (1) coat of Davies Eposeal
Broadcast aggregates on wet Davies Eposeal at 1kilo/sqm and dry overnight. Dust off aggregates
Topcoat: Apply two (2) coats of Davies Keramifloor
C. Ferrous Metal Surfaces
Primer/Sealer: Apply one (1) coat of Davies Epoxy Primer
Topcoat: Apply two (2) coats of Davies Keramifloor