EPOXY ENAMEL NON-TOXIC
Epoxy-Based
Davies Epoxy Enamel Non-toxic is a two component, air drying, chemically-cured epoxy coating system specially formulated for steel and masonry surfaces. When fully cured, it is completely odorless, tasteless and non-toxic. It exhibits excellent resistance to acid solution, brine, and other chemicals.
Product Details
Epoxy-Based
Interior
30-35 sq.m. per 4-Liters *Depending on surface porosity
8-10 Hours
SURFACE PREPARATION
New Painting
- All surfaces must be clean, dry, free from dust, dirt, chalk, laitance, efflorescence, rust, grease, oil and other foreign materials.
- Wipe off oil and grease with solvent or lacquer thinner.
- Remove rust, mill scale, and stains with sandpaper, wirebrush, or other abrading methods.
- Treat iron surfaces with heavy coating of rust and scale with Davies DV-200-X Rust Converter, wipe off residue and clean with lacquer thinner.
- Apply the appropriate metal primer immediately after cleaning and drying to avoid the onset of corrosion.
B. Repainting
- If the existing paint is sound and shows slight chalking, sand lightly and wipe off dust
- Remove cracked, peeling off old paint by scraping, wire brushing, or sanding. Use Davies DV-300-X Strip-eze Paint Remover to aid in scraping off old paint.
- Treat heavily corroded surfaces with Davies DV-200-X Rust Converter, wipe off residue and clean with lacquer thinner.
- Apply the appropriate metal primer immediately after cleaning and drying to avoid the onset of corrosion.
PAINTING SYSTEM
A. Metal, Ferrous
Primer/Sealer: Apply one (1) coat of Davies Epoxy Primer White
Topcoat: Apply two (2) coats of Davies Epoxy Enamel White Non-Toxic