PRODUCT DETAILS
Colors: Available in 15 color combinations (choice of plain or textured)
RECOMMENDED USE
Cement, metal, wood; for interior application
PAINTING INSTRUCTIONS
Mixing directions: Stir gently by hand before application.
Reduction: Use as is. Do not thin down.
Cleaning: Wash with tap water.
Application tools:
Paint Roller/ Baby Roller
Wall Art™ Honeycomb Roller
Wall Art™ Pressure feed Spray Gun
Preparation of the Substrate:
1. Make sure that the surface is clean and dry, free of dust, oil, laitance, pain, curing compounds, and other contaminants such as algae and mildew.
2. Scrape off any cement residue and loose material, and sand away rough edges for a smooth surface.
3. Surface must be cured for 28 days (or 5-7 days skimcoat preparation) before application.
Product Application Procedure:
Step 1: Apply Wall Art™ Granitex™ Sealer for new concrete by spray gun or roller for surface preparation. Let dry for 1 hour.
Step 2: For textured effect, apply Wall Art™ Granitex™ profiler by honeycomb roller on the surface. Let dry for 24 hours.
Step 3: Apply Wall Art™ Granitex™ Base Coat with water dilution ratio of maximum 10% by brush or roller. Let dry for 12 hours.
Step 4: Apply Wall Art™ Granitex™ Granicoat for finish using Wall Art Pressure Feed Spray Gun with compressor air pressure or approximately 30-50 psi using cross-lap method. Hold the gun approximately 18-14 inches at right angle to the surface. Let dry for 12 hours.
Step 5: Apply Wall Art™ Granitex™ Protectcoat as final clear coat using spray or roller. Let dry for 24 hours.