Davies Home Buddy is a super strength Polyester Body Filler, which is ideal for repairing surface imperfections on most substrates like metal, concrete, aluminum, wood, gypsum, fiber cement wall, plaster, and fiberglass. Its high-build formulation gives a very good anti-shrinking property. It has excellent adhesion and cures to a tack-free state in just a few minutes.
Features:
● Professional Grade Formula
● Superior Strength & Flexibility
● Impact resistant
● Very minimal shrinking
● Easy mixing ans sanding
● Fine and smooth finish
● Finish repair fast
Type : Polyester Based
Color : Light Pink
Specific Gravity: 1.32 ± 0.03 k/l
Mixing Ratio: 2 – 3% of hardener to weight of Base
Sanding Time @ 28° C: 30 minutes to 1 hour
Pack Size: Available at 1-L and 4-L pack
Pot life : 3 to 4 minutes
Pack Size: Available at 1-L and 4-L pack
Shelf Life: Approximately 6 months from date of manufacture. Store in a cool dry place.
For Concrete, Wood and Metal Surfaces
Surface Preparation:
Clean substrate with warm, soapy water to remove all dirt, wax, grease, oil and other contaminants.
Allow to dry thoroughly. Using a coarse 80-grit sandpaper, sand the damaged area to remove all paint and rust up to bare metal.
Sand 1 – 2 inches beyond the damaged area. Clean and remove all sanding dust.
Mixing:
Place the desired amount of filler on a clean, hard, non-porous surface.
After kneading the hardener tube thoroughly, squeeze out 2 – 3 parts hardener for every 100 parts of filler by weight. Mix thoroughly until a uniform color is achieved. Mix only amounts that can be used within 3 – 4 minutes. Do not add hardener into the can of filler.
Application:
Using firm pressure, use a putty knife and spread thin layers of mixed filler over repair areas for excellent adhesion.
Finishing:
After allowing Davies Home Buddy Polyester Body Filler to cure for 20 – 30 minutes, sand surface with 80-grit sandpaper and feather edge with 180 grit sandpaper to blend with edges.
Apply paint as needed. Clean up with acetone or lacquer thinner.
