An effective cleaning and etching solution in one pack for the preparation of floors for painting thus, saving time and labor costs.
Excellent for etching very dense, non porous concrete to improve coating adhesion.
Emulsifies oil and grease for easy removal.
Easy to use-solvent-free and non-flammable.
Just pour, rinse with tap water.
Plastic gallon container.
One year when stored in dry and cool conditions.
Mop or Brush
Remove oil, grease and other contaminants by cleaning with detergent, then apply Davies SP-00 Subprep clean and Etch Solution evenly unto the surface to be treated followed by scrubbing. For stubborn areas, repeated scrubbing using mechanical sander is necessary. Rinse with clean water. For nonporous concrete, treat with Davies SP-00 Subprep clean and Etch Solution then scrub, rinse with clean water and sand (preferably # 100 sandpaper) or use mechanical sander to assure proper coating adhesion. Determine porosity by pouring one ounce of water onto the concrete. If water soaks in, the surface is porous enough for coating. If water beads form on the surface, concrete is not porous and more treatment is needed.