Davies Metal Paints
Davies Keramikote

Davies Keramikote

Two Component Polyurethane Wall Coating
A two pack, air drying, chemically-cured urethane coating system developed to achieve decorative requirements and protective function even in the aggressive, polluted air of cities and industrial regions. Such advantages are particularly important on facades of high - rise buildings, on interior walls for lasting protection and for improving hygiene and appearance. Suitable for exterior and interior concrete, wood and metal substrates.

Features:

Outstanding Weather Resistance.

Optimum Chemical and Mechanical Properties.
High Water - Penetration Resistance.

Superb Aesthetic Value.

Protection Against Carbonation

Type:
Polyurethane Based


Finish:
Gloss, Semi-Gloss and Flat, Plain or Textured Finish


Color:
White, other colors per request.


Density, K/L @ 28°C,:
1.25 ± 0.03 K/L


Gloss @ 60°:
90 ~ 100


Dry Film Thickness (Approximately)

Wet Film (WFT)          : 111 microns ~ 133 microns per coat

Dry Film (DFT)            : 50 microns ~ 60 microns per coat


Practical Coverage                 
: Davies KM-90-25 Keramikote Penetrating Sealer : 20-25 m
² /4 liter/coat
: Davies KM-7000 Keramikote Undercoat Primer : 20-25 m
² /4 liter/coat
: Davies 9-901 Keramikote Cast : 5-6 m
²/4 liter/coat
: Davies Keramikote Topcoat : 20-25 m
² /4 liter/coat

Drying Time @28°C, : Surface Dry : 2 hours

   85% RH : Re-coat : Overnight


Pack Sizes:
16 liter and 4 liter cans


Shelf Life:
One year when stored in dry and cool conditions
Apply by brush, roller or spray
Cast by mortar gun


Mixing Direction                      
Stir both components well. Then add catalyst to base as supplied. Mix slowly but thoroughly. It is best recommended to transfer base in another bigger container before adding the catalyst to obtain homogeneous mixture.


Pot Life @28°C:
6-8 hours


Reduction:
Use as is. when necessary, reduce with
Davies KM-72 Keramikote Reducer.

Cleaning:
Davies KM-72 Keramikote Reducer



Painting System


Concrete Surfaces


Plain Finish

1 Apply one coat of
Davies KM 90-25 Keramikote Penetrating Sealer by brush, roller or spray and let dry for 6 hours.

2 When necessary, putty surface imperfections, hairline cracks with
Davies EPP-100 Epopatch using putty knife. Let dry and sand.

3 Apply one coat of
Davies KM-7000 Keramikote Undercoat Primer by brush, roller or spray and let dry.

4 Finish with two coats of
Davies Keramikote Topcoat. Allow 6 hours in between coats.

 

Textured Finish
1 Apply one coat of
Davies KM 90-25 Keramikote Penetrating Sealer by brush, roller or spray and let dry for 6 hours.

2 Apply one coat of
Davies KM 9-901 Keramikote Cast using mortar gun. Let dry for 3 hours or more depending on the thickness of cast applied.

3 Apply one coat of
Davies KM-7000 Keramikote Undercoat Primer by brush, roller or spray and let dry.

4 Finish with two coats of
Davies Keramikote Topcoat. Allow 6 hours in between coats.

 

Wood Surfaces
1 Apply one coat of Davies KM-7000 Keramikote Undercoat Primer by brush, roller or spray and let dry.


2 Finish with two coats of
Davies Keramikote Topcoat. Allow 6 hours in between coats.

 

Metal Surfaces
Metal, Ferrous

Primer :
Davies 92-10 Epoxy Red Oxide Primer
Finish :
Davies Keramikote Finish

M
etal, Non Ferrous
Pre-treat :
Davies 900 Vinyl Wash Primer
Primer :
Davies 92-42 Epoxy Primer Zinc Phosphate Yellow
Finish :
Davies Keramikote Finish


Other Surfaces (Plastics, PVC, Fiberglass)
1 Finish with two coats of Davies Keramikote Topcoat. Allow 6 hours in between coats.
About Davies Paints

Davies Paints is the Philippines' no. 1 paint exporter. We continue to expand our reach and find new ways to innovate and ensure only the best possible quality in our diverse range of products.