Davies Exterior Paints
Davies Powerfloor

Davies Powerfloor

100% Solid Epoxy-based Floor Coating
A high solid, heavy duty epoxy floor coating. It forms a tough, smooth, gloss finish that has excellent resistance to abrasion, impact and spillage of solvent, oil, petrol and dilute acidic and alkaline solutions.

Features:

Suitable for the protection of interior concrete floors.
Forms a tough, smooth, gloss finish.
Excellent resistance to abrasion, impact and solvent spillage
Type:
Epoxy / Polyamide Based

Finish:
Gloss

Color Range
: 9 standard colors, other colors per request
: PF-00 White PF-30 Mint Green PF-64 Dark Velvet Gray
: PF-10 Rustic Red PF-31 Tropical Green PF-90 Sand Beige
: PF-20 Misty Blue PF-40 Canary Yellow
: PF-21 Classic Blue PF-61 Velvet Gray

Density, K/L @ 28°C,:
1.67 ± 0.03 K/L (White)

Gloss @ 60°:
90 ~ 100

Practical Coverage:
13-16 m² /4 liter/coat @ 0.40 mm thickness by roller

Drying Time @ 28°C
: Dry to touch in 8 hours. Re-coatable between 5-24 hours in normal drying conditions
: Light Foot Traffic  : 24 hours
: Full Hardness : after 7 days

Pack Sizes:
4 liter can set

Shelf Life:
One year when stored in dry cool conditions, out of direct sunlight
Apply by brush, roller or spray

Mixing Direction    : Stir both components well before mixing. Add catalyst to base    and mix slowly but thoroughly for 10 minutes. It is better to transfer contents to a bigger container for easy mixing.

Mixing Ratio         : 3 parts base to 1 part catalyst by volume

Pot Life @ 280C     : 1 - 1 ½ hours

Thinning / Cleaning     : Davies-95 Epoxy Reducer


Painting System


Concrete Surfaces
1 Apply one coat of Davies Eposeal by brush or roller and let dry for 5-24 hours.
        Option 1. Plain Finish without aggregates Proceed to Step 2 & 3
        Option 2. Non-Skid Finish
        Broadcast aggregates on still wet Eposeal at 1 kilo/m² and let it dry overnight.
        When dry, dust-off excess aggregates. Then proceed to step 3.

2 When necessary, putty hollow surfaces with Davies Epopatch - Epoxy Patching Compound.

3 Finish with one coat of Davies Powerfloor by brush or roller. (By brush is preferred for Non-skid Finish). Let dry overnight.


Steel Surfaces
1. Apply one coat of Davies Epoxy Primer by brush or roller and let it dry.

2. Finish with one coat of Davies Powerfloor by brush or roller. Let dry overnight
About Davies Paints

Davies Paints is the Philippines' no. 1 paint exporter. We continue to expand our reach and find new ways to innovate and ensure only the best possible quality in our diverse range of products.