Davies Exterior Paints
Davies Keramifloor

Davies Keramifloor

Two Component Polyurethane Floor Coating
Davies Keramifloor is a two-pack, air drying, chemically-cured coating system developed to protect floors of aggressive, polluted environments. Such advantages are particularly important on floors of industrial plants, warehouses, and other commercial establishments for lasting protection and for improving hygiene and appearance.

Features:

Outstanding weather stability.
Optimum chemical and mechanical properties.
High water-penetration resistance.
Superb aesthetic value.
Protection against carbonation.
Type:
Polyurethane Based

Finish:
Semigloss

Color               
: 8 standard colors, other colors per request
: KF-00 White KF-30 Spanish Green KF-61 Velvet Gray
: KF-10 Tile Red KF-40 Marking Yellow KF-64 Dark Velvet Gray
: KF-21 Crystal Blue KF-60 Black KF-90 Sand Beige

Density, K/L @ 28°C,:
1.28 ± 0.03 K/L

Gloss @ 60° : 15 ~ 25

Dry Film Thickness (Approximately)
Wet Film (WFT) : 107 microns ~ 143 microns per coat
Dry Film (DFT) : 45 microns ~ 60 microns per coat

Practical Coverage :
20-25 m2/4 liter/coat

Drying Time @ 28°C:
Dry to touch in 8 hours. Re-coatable between 5-24 hours in normal drying conditions

Pack Sizes:
4 liter can set

Shelf Life:
One year when stored in dry cool conditions, out of direct sunlight
Apply by brush, roller or spray

Mixing Direction:
Stir both components well before mixing. Add catalyst to base and mix slowly but thoroughly for 10 minutes, then leave to stand for another 10 minutes before application. It is better to transfer contents to a bigger container for easy mixing.

Pot Life @ 280C:
6 to 8 hours

Thinning / Cleaning:
Davies KM-72 Keramikote Reducer


Painting System

Concrete Surfaces
1 Apply one coat of Davies Eposeal by brush or roller and let dry for 5-24 hours.
Option 1 Plain Finish without aggregates
            Proceed to Step 2 & 3
Option 2 Non-Skid Finish
            Broadcast aggregates on still wet Eposeal at 1 kilo/m2 and let it dry overnight.
            When dry, dustoff excess aggregates. Then proceed to step 3.

2 When necessary, putty hollow surfaces with Davies Epopatch Epoxy Patching Compound.

3 Finish with two coats of Davies Keramifloor by brush or roller. (By brush is preferred for Non-skid Finish).


Steel Surfaces

1 Apply two coats of Davies Epoxy Primer by brush or roller and let it dry.
2 Finish with two coats of Davies Keramifloor by brush or roller. Let dry overnight
About Davies Paints

Davies Paints is the Philippines' no. 1 paint exporter. We continue to expand our reach and find new ways to innovate and ensure only the best possible quality in our diverse range of products.