Davies Keramifloor

Painting System

Concrete Surfaces

1. Apply one coat of Davies Eposeal by brush or roller and let dry for 5-24 hours.
    Option 1 Plain Finish without aggregates
    Proceed to Step 2 & 3
    Option 2 Non-Skid Finish
    Broadcast aggregates on still wet Eposeal at 1 kilo/m2 and let it dry overnight.
    When dry, dust-off excess aggregates. Then proceed to step 3.
2. When necessary, putty hollow surfaces with DAVIES Epopatch Epoxy Patching Compound.
3. Finish with one coat of DAVIES KERAMIFLOOR by brush or roller. (By brush is preferred for Non-skid Finish). Let dry overnight.

 See steel surfaces..